Board Level Shielding
Specified by engineers around the world, Orbel's standard and custom board level shielding (BLS) offers unlimited design flexibility for surface-mount and through-hole configurations. With an array of standard shields that can be customised to any performance requirement, Orbel specialises in today's most challenging EMI/RFI shielding applications. BLS shielding can also be custom-engineered from start to finish based on your specific need.
- Unlimited shield sizes
- Variety of material options
- Multiple fence/cover retention methods
- Variety of pin and surface-mount styles
- Custom trace notches at no extra cost
- PCB Level Shielding
- Standard ventilation holes
- EZ-Marking™ part number and logo identification
- Standard pick target for pick and place
- Available in tape-and-reel or tray packaging
- RoHS-compliant
EZ-SHIELD GUARDIAN™
The Guardian™ is a one-piece circuit board shield available in a through-hole or surface mount design. It is intended for inaccessibility to components, where cost is important.
- Shield heights range from: 0.030” to 2.00”
- Material thicknesses: 0.008”, 0.010” and 0.015”
- Alignment pins are centrally located on each side
- Standard tight corners
SNAP-SHIELD BULLZEYE™
The Bullzeye™ is a two-piece surface mount shield design with castellated edges for ease of soldering & trace-pass through. The Bullzeye offers a pick target for pick & place automation, with added part stability to achieve maximum coplanarity in the reflow process.
- Shield heights range from 0.090” to 2.00”
- Pick target for pick and place automation
- Castellation edge for ease of soldering and trace-pass • Louvered corners for high RF integrity
SNAP-SHIELD LAZERLOC™
The LaZerLoc™ is a two-piece shield available in a through-hole or surface mount design. The LaZerLoc offers zero corner slots for high RF integrity when specifying larger and more complicated shields in hand placement applications.
- Shield heights range from 0.090” to 2.00”
- Fully welded frame, no corner seams
- Standard 0.080 flange on fence increases shield rigidity
- Standard dimple & slot cover retention
SNAP-SHIELD MICRO™
The Micro™ offers the lowest two-piece surface mount shield assembly in the industry. Micro shields are ideal when space is limited but a two piece shield is required. The Micro offers a pick target for pick & place automation, with added part stability to achieve maximum co-planarity. • Shield heights range from 0.058” to 0.100”
- Standard pick target for pick and place automation
- Mini dimple & slot cover retention method
- Standard with tight corners
VAULT-SHIELD™
The Vault-Shield™ is a two-piece through-hole shield design used primarily in extreme shock and vibration applications. The Vault-Shield’s tab and slot retention method provides the added security of the best cover-to-frame retention available in the market.
- Shield heights range from 0.030” to 2.00”
- Fully welded frame, no corner seams
- Standard tab and slot retention method
- Material thicknesses 0.008”, 0.010” and 0.015”
MULTICAV™
The MultiCAV™ is a compartmentalized shield that combines multiple shields into one to save valuable board space while reducing shield weight and overall costs. The MultiCAV products typically come in a two-piece construction with inner walls strategically placed while utilizing one common cover.
- Shield heights range from: 0.075” to 2.00”
- Standard dimple & slot cover retention
- Customised to your board trace specifications
- Locking tabs for grounding the inner walls and cover